# -Ragebyte

### 🧰 Preparation Before Key Activation

Before activating your key, make sure your system is properly prepared.

### 🚫 Mandatory Requirements (IMPORTANT)

Before running the loader, you **MUST**:

* ❌ Remove all antiviruses
* ❌ Disable Windows Defender
* ❌ Disable Windows SmartScreen
* ❌ Delete **FACEIT** (CS:GO anti-cheat)
* ❌ Delete **Vanguard** (Valorant anti-cheat)
* ❌ Disable Secure Boot in Bios

⚠️ These protections run at kernel level and **will block the software**.

### Enable Hyper-V

Hyper-V needs to be enabled for the loader to work properly. You can enable it through **Control Panel → Programs and Features → Turn Windows features on or off**.

{% stepper %}
{% step %}

#### Open Control Panel

Open **Control Panel**.
{% endstep %}

{% step %}

#### Go to Programs and Features

Go to **Programs and Features**.
{% endstep %}

{% step %}

#### Open Windows features

Click **"Turn Windows features on or off"** on the left side.
{% endstep %}

{% step %}

#### Enable Hyper-V

Find **Hyper-V** and check the box to enable it.
{% endstep %}

{% step %}

#### Restart your PC

Click **OK** and restart your PC when prompted.
{% endstep %}
{% endstepper %}

⚠️ Hyper-V only shows up if you are using the **Pro** version of Windows. On Windows Home, this option will NOT appear.

![](/files/ba426e2ebd33f23c65636951d092c0a13e23461d)

### Install OpenSSL

Install the 64-bit OpenSSL Light v3.6.2 package.

[Download OpenSSL Light v3.6.2 (64-bit)arrow-up-right](https://kwfhmxfqormzobzbdhmm.supabase.co/storage/v1/object/public/downloads/Win64OpenSSL_Light-3_6_2.exe)

### Load the Hypervisor

Now it's time to load the hypervisor. Open the loader, insert your license key, and follow the loader's instructions.

{% stepper %}
{% step %}

#### Open the Loader

Open the [**Loader** arrow-up-right](https://flosense.lat/) as Administrator.
{% endstep %}

{% step %}

#### Enter your license key

Insert your **license key** when prompted.
{% endstep %}

{% step %}

#### Follow the loader instructions

Follow the instructions shown in the loader.
{% endstep %}

{% step %}

#### Inject the hypervisor

When asked, type **1** to inject the hypervisor.
{% endstep %}

{% step %}

#### Wait for completion

The loader will do everything automatically.
{% endstep %}

{% step %}

#### Restart notification

Once done, the loader will notify you that your **PC will restart in 60 seconds**.
{% endstep %}
{% endstepper %}

**What you'll see:**

{% stepper %}
{% step %}

#### Dependency check

All checks should pass:

![](/files/f13c038cb916151a315cc054e0cd31d809c2f162)
{% endstep %}

{% step %}

#### Bypass prompt

Click Yes to load:

![](/files/0e27ffafa91e99745cd491c0dc25a99f4f4ba038)
{% endstep %}

{% step %}

#### Downloading dependencies

Wait for it to finish:

![](/files/8f72a7fc3848c09f288c7d442d72a6f1c20c9b54)
{% endstep %}

{% step %}

#### Restart notification

Wait for the automatic restart — do not manually restart your PC.

![](/files/c67255a2005f44201df5a3723fb3e66a43502b07)
{% endstep %}
{% endstepper %}

**After restart — Boot screen**

During the boot phase, you will see the following screen. This means the **hypervisor loaded correctly** with no issues.

**Important:** After you load back into the desktop, do NOT go straight into the game! Make sure to follow the rest of the steps below first.

![](/files/d290af5bba824c085e09e06ab890bcac3e4e742e)

### Configure Discord Overlay

After loading the hypervisor and restarting, you need to set up **Discord** as your overlay. Make sure Discord is opened and running as **Administrator** before launching the loader.

{% stepper %}
{% step %}

#### Open Discord as Administrator

* Right-click Discord and select **Run as Administrator**
* Go to **Settings** (gear icon at the bottom left)
  {% endstep %}

{% step %}

#### Configure Game Overlay

1. Navigate to the **Game Overlay** section in Discord settings
2. Turn **ON** the Discord overlay (the first toggle option)
3. Make sure **Legacy overlay** is **OFF**
4. Set the overlay keybind to `F12`

![](/files/39d50bb9818444f04f1847601a2751e19cccb7cb)
{% endstep %}

{% step %}

#### Enable Hardware Acceleration

* In Discord Settings → **Advanced**, enable **Hardware Acceleration**

![](/files/91984b97c21decd131708385eb66dc8f2a390d15)
{% endstep %}
{% endstepper %}

⚠️ Critical Warning

Discord **must** be running as Administrator **before** you open the loader. If Discord is not running as admin, the overlay will not work correctly.

### Run the Loader

Run the loader and get into the game.

{% stepper %}
{% step %}

#### Run the loader as Administrator

Run the loader as **Administrator**.
{% endstep %}

{% step %}

#### Enter your license key

Enter your **license key** when prompted.
{% endstep %}

{% step %}

#### Follow the remaining loader instructions

Follow the remaining loader instructions.
{% endstep %}

{% step %}

#### Launch the game

Launch the game and get into the **lobby**.
{% endstep %}
{% endstepper %}

⚠️ Make sure Discord is running as Admin before this step

### Verify Overlay & Inject

Once you're in the game lobby, verify the overlay and inject.

{% stepper %}
{% step %}

#### Open the Discord overlay

Press `F12` — the Discord overlay should open.
{% endstep %}

{% step %}

#### Confirm it is working

If it opens, everything is working correctly. Close it with `F12`.
{% endstep %}

{% step %}

#### Inject successfully

Press `F1` — you will hear a **loud beep**, confirming successful injection.
{% endstep %}

{% step %}

#### Open the cheat menu

Press `Insert` to open the cheat menu.
{% endstep %}
{% endstepper %}

⚠️ Overlay not opening?

If the Discord overlay doesn't open when pressing F12, go back to the Discord Overlay setup step and make sure everything is configured correctly. Discord must be running as Admin.

After injection, you'll see a message box with instructions.

{% stepper %}
{% step %}

#### A message box will appear

A message box will appear.
{% endstep %}

{% step %}

#### Close the message

Click Okay to close the message.
{% endstep %}

{% step %}

#### Open the game

Open the game.
{% endstep %}
{% endstepper %}

### Activate Menu In-Game

Once the game is fully loaded, activate the menu.

**Important: Wait until the notification disappears.**

{% stepper %}
{% step %}

#### Wait for the game to fully load

Wait for the game to fully load.
{% endstep %}

{% step %}

#### Press F1 a few times

Press F1 a few times.
{% endstep %}

{% step %}

#### Open the menu

Press Insert to open the menu.
{% endstep %}
{% endstepper %}

The menu should now be visible in-game!

### Crash / Troubleshooting

If you are experiencing crashes, follow all the steps below to ensure your system is fully up to date.

Outdated drivers and system software are the #1 cause of crashes. Update everything before contacting support.

**1. Update Windows**

{% stepper %}
{% step %}

#### Open Windows Update

Open Settings → Windows Update.
{% endstep %}

{% step %}

#### Check for updates

Click 'Check for updates' and install all available updates.
{% endstep %}

{% step %}

#### Restart your PC

Restart your PC after all updates are installed.
{% endstep %}
{% endstepper %}

**2. Update GPU Drivers**

{% stepper %}
{% step %}

#### Download the latest driver

Go to nvidia.com/drivers and download the latest driver for your GPU.
{% endstep %}

{% step %}

#### Install the driver

Run the installer and do a clean installation (recommended).
{% endstep %}
{% endstepper %}

**3. Update CPU / Chipset Drivers**

{% stepper %}
{% step %}

#### Download Intel Driver & Support Assistant

Go to intel.com/content/www/us/en/support/detect.html and download Intel Driver & Support Assistant.
{% endstep %}

{% step %}

#### Install the latest chipset drivers

Install the latest chipset drivers and restart your PC.
{% endstep %}
{% endstepper %}

**4. Update BIOS**

{% stepper %}
{% step %}

#### Visit your motherboard manufacturer's website

Visit your motherboard manufacturer's website (ASUS, MSI, Gigabyte, etc.) and find your motherboard model.
{% endstep %}

{% step %}

#### Install the latest BIOS version

Download and install the latest BIOS version following the manufacturer's instructions.
{% endstep %}
{% endstepper %}

After updating everything, restart your PC and try again. Most crashes are resolved by keeping your system up to date!


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.tomdennsysmarket.net/ragebyte.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.